Friendly Waters Scuba Dive | Dive Equipment Distributor Servicing | Singapore
top of page

AQUASEAL FD REPAIR ADHESIVE AND CURE ACCELERATOR

AQUASEAL FD REPAIR ADHESIVE AND CURE ACCELERATOR

GEAR AID

Reserve now!

*Once you’ve placed an order, you will receive an Order Acknowledgement email to confirm your order details. After confirmation, your order is reserved for you for 72 hours for pick up at our store.

Details

__________________________________________________________________________________

Need a fast fix for torn gear? Use Aquaseal FD repair adhesive and Cure Accelerator (formerly Cotol-240) to quickly tackle rips and tears in waders, wetsuits and muckboots. Aquaseal FD is a clear and waterproof urethane adhesive that comes in a 0.75 oz tube. It offers excellent abrasion resistance and can withstand constant pulling and movement. Using Aquaseal FD with the Cure Accelerator together and be back in the water within two hours. This formula also improves gear repairs by cleaning the surface and shortening tack time to 15 minutes. For a speedy solution to gear failures, use Aquaseal FD and Cure Accelerator.

  • Durable– Bonds permanently to surfaces and dries as a flexible rubber that’s tough and abrasion resistant

  • Flexible – Once cured, it’s a flexible rubber that bends with neoprene and other elastic gear

  • Waterproof – Dries to provide a water-tight seal that won’t peel or crack over time

  • Abrasion Resistant – Strong repairs that can withstand scrapes and scratches

  • All-purpose – Bonds to all types of outdoor fabrics, including: neoprene, rubber, nylon, canvas and vinyl

California WARNING: Using this product will expose you to toluene, a chemical known to the State of California to cause birth defects or other reproductive harm www.P65Warnings.ca.gov.

Specs

__________________________________________________________________________________

  • Material: thermoset urethane

  • Adhesive Size: 0.75 oz

  • Color: clear

  • Adheres to: neoprene, rubber, nylon, canvas, vinyl/PVC

  • Cure Time: 2 hours with cure accelerator

  • Cure Method: Humidity

  • Application Temperature: 60° to 100°F

  • Use Temperature: -20° to 180°F

  • Storage: store in bag in freezer

  • Made in USA

bottom of page