APEKS WTX3 BUOYANCY CELL
WTX3 Buoyancy Cell
Colours Available: Black
*Once you’ve placed an order, you will receive an Order Acknowledgement email to confirm your order details. After confirmation, your order is reserved for you for 72 hours for pick up at our store.
The WTX and WTX-D Series is a selection of harnesses, buoyancy cells and accessories which offer unparalleled versatility due to the modular nature of the whole system. Each component can be configured into a highly technical rig for those trained to push the limits, or scaled down to make a travel friendly set up suitable for any diver.
This single cylinder buoyancy cell offers 34lbs of lift and can mate to the WTX Harness or directly to a WTX Back Plate.
Features & Benefits
Gussets along each side allow for a full 34 lbs of lift without compromising the overall size of the WTX3.
4 slots allow it to be mounted to a WTX harness or back plate using upper and lower nylon cylinder bands.
2 pairs of grommets allow the WTX3 to be bolted on if a single tank adapter (STA)is used.
A 2” (5cm) wide restriction band at the bottom of the WTX3 allows the cylinder to nestle into the inflated buoyancy cell so it doesn’t get pushed away from your body.
A 2” (5cm) D-ring on the restrictor band is a convenient place to add accessories like a surface marker buoy.
The airway comes off the top back centre of the cell. A safety cable inside the elliptical hose prevents hyperextension of the corrugated hose.
Features the Apeks WTX Airway Complete with brass buttons.
Includes front, lower left pull dump.
Constructed from durable 840-denier nylon.